Skip to main content

Boot up ubuntu faste

Ubuntu reached the 10 second boot time with Lucid Lynx. what if your system isn’t quite reaching that point?




You can speed it up using profiling option. To do this follow these steps:



1.At your boot screen press “e” (for edit).

2.Use your arrow key and move down to the entry beginning with “kernel”.

3.Press “e” again.

4.Add “profile” (no quotes) at the end of this line.

5.Hit Enter.

6.Click “b” (for boot).

The firs time you boot with profile it will take a little longer. What this is doing is profiling your boot process so it knows what files are accessed and then sorts them according to how they are stored on your drive. Your next boot should be considerably faster.

Comments

Post a Comment

Popular posts from this blog

How to configure multipath Debian CentOS for IBM Storage

This detailed how to guides to achieve high availability and performance on Debian and CentOS for accessing storage space at IBM DS8300 Data Storage Systems. Tested on Debian GNU/Linux 5.x Lenny 64 bits and CentOS 5.3 64 bits running on 8 cores blades, with Host Bus Adapters Qlogic and Emulex Light Pulse Fiber Channel in deployed systems at SERPRO . Observations showed that Debian Lenny has the best performance, for our app load profile and hardware. Also, there are listed a number of previously not clearly documented critical pitfalls to avoid. STUDY whole articles, hints, implications, and cited resources before planning your deployment. Every detail matters . Before start, you must have LUNs at IBM DS8300 storage configured for high availability and performance as explained at the article How to configure maximum performance storage space for Debian GNU/Linux on IBM DS 8300 Data Storage Systems . Multipath and storage basic concepts In order t...
Post a Comment
Read more

Squid Access Lists

Access Lists There are a number of different access lists: http_access : Allows HTTP clients (browsers) to access the HTTP port. This is the primary access control list. http_reply_access : Allows HTTP clients (browsers) to receive the reply to their request. This further restricts permissions given by http_access , and is primarily intended to be used together with rep_mime_type acl for blocking different content types. icp_access : Allows neighbor caches to query your cache with ICP. miss_access : Allows certain clients to forward cache misses through your cache. This further restricts permissions given by http_access , and is primarily intended to be used for enforcing sibling relations by denying siblings from forwarding cache misses through your cache. cache : Defines responses that should not be cached. url_rewrite_access : Controls which requests are sent through the redirector pool. ident_lookup_access : Controls which requests need an Ident lookup. always_dire...
Post a Comment
Read more

ipsec tunnel pfSense and Centos

pfSense 1.2.3 -------- external ip: 1.1.1.1 internal ip: 172.20.1.20 internal network: 172.20.1.0/24 Centos 5.5 -------- external ip: 2.2.2.2 internal ip: 172.20.2.1 internal network: 172.20.2.0/24 pfSense config from a reset. Firewall rule to allow all ipsec communication (all protocols). pfSense ipsec config -------------------- Mode: Tunnel Interface: WAN (I'm not sure this should be WAN, but changing it to LAN makes no difference) Local subnet: 172.20.1.0/24 Remote subnet: 172.20.2.0/24 Remote gateway: 2.2.2.2 Phase 1 Negotiation mode: agressive My identifier: My IP adress Encryption algorithm: 3DES Hash algorithm: SHA1 DH key group: 2 Authentication method: Pre-shared key Pre-Shared Key: secret Phase 2 Protocol: ESP Encryption algorithms: Rijndael (AES) Hash algorithms: SHA1 PFS key group: 2   Centos ipsec config ------------------- /etc/sysconfig/network-scripts/ifcfg-ipsec0 TYPE=IPSEC ...
1 comment
Read more